| Kataloški broj: | HA41114E |
| Šifra artikla: | 0404077 |
| Barkod: | 4250238516446 |
| Sidrena cijena 10.09.2026. (€): | 266,99 |
| Opis: | The HA 41114 E in-house amplifier‘s intended for amplifying and distributing RF signals in cable TV networks. The amplifier is local powered from the mains 230 VAC. The HA 41114 E has one input, one output and one test point. According to the standard ETSI EN 303 354 V.1.1.1, amplifier type is launch selectivity classification 0. Features • GaAs push-pull output stage • High output level • Interstage attenuator, slope precorrection and adjustable gain & slope regulators • Output test point -30 dB • Weatherproof and RF-screened die-cast housing High power in-house amplifier HA 41114 E Installation instructions Firstly, please read the mounting and safety instructions! The amplifier should be mounted vertically with RF connectors underneath. The device must be fixed with steel screws o 4...4.5 mm. The screws are not included. From top, front and bottom of installed amplifier must be at least 10 cm clearance. The cover should be fastened with 3...4 Nm (key included). Disconnect the power plug for installation or work on the wiring. The device must be grounded according to EN 60728-11. Delivery content 1x HA 41114 E 1x Allen key 1x Manual with mounting- and safety instruction Technical data HA 4114 E Article-No. 6300001 Frequency range 47 ... 862 MHz Flatness ±0.5 dB Gain 41 dB Gain adjustment 0 ... 18 dB Slope adjustment, typical 0 ... 18 dB Interstage attenuator 0/3/6/9 dB Inverse equalizer 0/3/6/9 dB Output level CTB/CSO (EN60728-3)* 114 dBµV Input and output return loss ?18 dB @40 MHz - 1.5 dB/octave Noise figure <5 dB Test point -30 dB Supply voltage limit values 198...250 VAC, 50/60 Hz Power consumption 13 W Operating temperature range -20...+50 °C Dimensions 180 x 132 x 76 mm (main body) 213 x 132 x 76 mm (with fixing ears) Weight (packed) 1.4 kg |